The Supermiata offset knuckle bushing is a direct replacement for the OEM lower ball joint centered bushing in the front knuckle. Achieve an additional 1° camber. Front only.
1 review for Supermiata NC Offset Knuckle Bushing 06-15
Rated 5 out of 5
Austin Evans (verified owner)–
Was able to achieve -3.5 degrees front and -3.0 degrees rear camber at 4.5” pinch weld height very easily with some room left in the adjusters. I didn’t even need a press—just hammered out the stock ones with an impact socket, then put the bushings in the freezer for an hour and heated the knuckle to around 400 degrees F. They dropped in with no pressure.
Only logged in customers who have purchased this product may leave a review.
Austin Evans (verified owner) –
Was able to achieve -3.5 degrees front and -3.0 degrees rear camber at 4.5” pinch weld height very easily with some room left in the adjusters. I didn’t even need a press—just hammered out the stock ones with an impact socket, then put the bushings in the freezer for an hour and heated the knuckle to around 400 degrees F. They dropped in with no pressure.